SigmaStream
Insights · Article

Why Data Quality Matters Before GenAI

Generative AI (GenAI) tools can summarize reports and explain trends across upstream operations. That output is only as reliable as the quality of data behind it. Scaling AI and GenAI in oil and gas requires data that is accurate, timely, traceable, and relevant to the activity it describes. Well-governed data also makes GenAI safer to adopt, because the company knows what each tool reads and where answers come from.

30 September 2026 · Updated 13 November 2026
A robotic hand reaching into a wall of live operational dashboards and touching one panel

What Data Quality Means in Oil and Gas Operations

A dataset can be complete and on time yet wrong for the question asked. A frozen sensor keeps a channel populated. One tag name can describe two different measurements on two sites. DNV, the Norwegian assurance and classification body once named Det Norske Veritas, has warned that AI fed with "incomplete, inaccurate, old or limited data can generate erroneous insights" (DNV, 2024).

Two channels side by side: a live signal that keeps moving, and a frozen sensor holding one value, both equally complete

How Data Quality Helps GenAI Deliver Value

Validated data shortens the path from question to trusted answer. GenAI explanations are easier to check against the record, and the number of false alerts fall when validation reflects operating conditions.

The AI Risk Management Framework from the United States National Institute of Standards and Technology (NIST) treats validity and reliability as a necessary condition for trustworthy AI (NIST, 2023).

How Data Aggregation Helps, and Where It Needs Care

Relating a completion design to early production, or a drilling event to later well performance, needs one time-aligned view of real-time and historical data.

Aggregation concentrates risk, because each source brings its own tags, units, sampling rate and clock. A 2026 preprint on Equinor's public Volve dataset found the same wells named three incompatible ways across daily drilling reports, Wellsite Information Transfer Standard Markup Language (WITSML) data and production records (Lu, 2026). Such mismatches can go undetected because the data may be technically valid but inconsistent in meaning, units, or context. Validation, time alignment and agreed naming make aggregation dependable.

A daily drilling report, WITSML and production records naming the same well three different ways, joined into one view with no error raised

The Data Problems GenAI Cannot Fix by Itself

A University of Stavanger study describes gaps, irregular sampling, noise-affected values, out-of-range readings and the same property measured by more than one tool and warns that slight clock differences can distort merged data (Geekiyanage, Tunkiel and Sui, 2021).

An anomaly explanation may name the wrong cause because two feeds were seconds apart. No single issue guarantees a wrong decision, but each weakens the evidence.

Why Context-Aware Data Quality Works Better Than a Universal Rule

Operational state changes how a value should be interpreted. Standpipe pressure repeating a value for an extended period while drilling ahead may indicate a frozen feed, but it must be checked against operating conditions and sensor resolution. With the pumps off during a connection, a flat reading is expected once pressure is settled. In completions, a zero slurry rate between frac stages is normal when pumping has stopped, while a zero rate during active pumping points to a data problem. In production, a zero flow rate on a flowing well needs checking, and the same zero during an established shut-in is expected.

Rules that ignore operational context can trigger false alarms during normal operations and fail to flag readings that are inconsistent with the activity underway. Context-aware data quality adjusts criteria to operational state, activity, channel and hole section.

The same flat standpipe pressure reading: flagged while drilling ahead, expected with the pumps off during a connection

Adopting GenAI Safely With Governed Data

Well data is often commercially sensitive, and DNV notes that every link between AI and critical control systems or data sources is a possible attack entry point (DNV, 2024). The NIST Generative AI Profile lists data privacy, information security and confabulation among the risks to manage (NIST, 2024).

A company that knows where each dataset came from, who owns it and how it was validated can decide which data a GenAI tool may read, keep sensitive records within existing access controls and log the sources supporting each answer. Advisory, read-only use cases with engineer review add a safeguard.

A Practical Checklist Before Deploying GenAI

  • Which system captured each channel, and is the raw record kept?
  • Is completeness measured by operational state?
  • Are units, tags and mnemonics reconciled, and feeds aligned to one clock?
  • Does each record carry the operational state at capture?
  • Which datasets may the GenAI tool read, and under whose rules?
  • Can every answer be traced to its source records?
  • Who owns each validation rule, and who monitors quality after go-live?

Where Veras Fits in Drilling

Veras is SigmaStream's configurable data-quality intelligence framework. Veras reads configured time-indexed and depth-indexed channels and calculates DQI (Data Quality Index) in processing windows, supporting reliable data across drilling workflows. Supported checks include minimum and maximum thresholds, frequency, data gap, data count, latency, precision and staleness.

Data quality managers use Veras to define, measure and refine validation criteria that can vary by channel, operational activity and context. When RMS (Relevance Matrix Service) is enabled, Veras applies rules using the channel, operational event and hole section.

The standpipe example works this way. A repeating value while drilling ahead can be flagged, while the same flat reading with the pumps off is treated as expected, because the pumps-off event is configured in the RMS lens. Veras does not infer operational conditions from channel values, so event-specific behavior must be configured explicitly.

Veras does not persist raw operational data. It processes the data it retrieves and stores the resulting DQI records. Better data quality visibility strengthens trust in analytics and data-driven decisions, alongside engineering review and data governance.

Data Quality Is the First Layer of AI Readiness

Start with one proposed GenAI use case. List its sources, agree on access rules and measure quality by operational state. Scale once the data is validated, contextualized and governed, and keep monitoring.

Frequently Asked Questions

Why does data quality matter before GenAI in oil and gas?

GenAI produces fluent answers from the data it receives. A model cannot confirm that a measurement was accurate, current or recorded during the operational state a question assumes. Completeness, units, time alignment and context, validated first, give GenAI a dependable base.

How does data aggregation support GenAI?

Aggregation brings drilling, completions and production records into one time-aligned view, so GenAI can address questions spanning the well lifecycle. It adds value when sources are validated, clocks aligned and names standardized. Without those steps, mismatched records are joined silently.

How can an operator assess AI readiness?

Pick one proposed use case. Identify its sources, confirm access rules, then measure accuracy, completeness, timeliness, unit and tag consistency and time alignment by operational state. Confirm who owns each validation rule and who monitors quality once it is live.

References and Sources

  1. DNV. "AI spells opportunity and manageable risk for the oil and gas industry." DNV, 1 October 2024.
    https://www.dnv.com/article/ai-spells-opportunity-and-manageable-risk-for-the-oil-and-gas-industry/
  2. Geekiyanage, S.C.H., Tunkiel, A. and Sui, D. "Drilling data quality improvement and information extraction with case studies." Journal of Petroleum Exploration and Production Technology, vol. 11, 2021, pp. 819 to 837. Open access under a CC BY 4.0 license.
    https://link.springer.com/article/10.1007/s13202-020-01024-x
  3. Lu, R. "TADI: Tool-Augmented Drilling Intelligence via Agentic LLM Orchestration over Heterogeneous Wellsite Data." arXiv preprint 2605.00060, 30 April 2026. Preprint, not peer reviewed.
    https://arxiv.org/abs/2605.00060
  4. National Institute of Standards and Technology. "Artificial Intelligence Risk Management Framework (AI RMF 1.0)." NIST AI 100-1, January 2023.
    https://doi.org/10.6028/NIST.AI.100-1
  5. National Institute of Standards and Technology. "Artificial Intelligence Risk Management Framework, Generative Artificial Intelligence Profile." NIST AI 600-1, July 2024.
    https://doi.org/10.6028/NIST.AI.600-1

Last reviewed October 2026

One stop shop for all your data needs.